If you want to save money and reduce waste, this is for you! Making a DIY Dawn Powerwash refill is so easy that you won’t believe it!
I love making my own Dawn powerwash refill because I reduce waste by using the original Dawn Powerwash bottle instead of buying a new plastic one! You won’t even believe how much you can save by doing this. Let me tell you how you can also make your solution right now!
In this post, you will learn:
- Why is Dawn Powerwash so good?
- Can I make my own Dawn Powerwash?
- What is one secret ingredient in DIY Dawn Powerwash?
- What are the DIY Dawn Powerwash ingredients?
- What are the ingredients in Dawn Powerwash?
- How to make Homemade Dawn Dish Spray?
- How to use Diy Dawn Powerwash?
- FAQs
Why is Dawn Powerwash so good?
Dawn Powerwash is not just a dish soap but magic! There is a reason for that! Dawn Powerwash has one key ingredient, which is called sodium lauryl sulfate. It is a powerful degreaser that helps to break down and dissolve stubborn grease and oil on surfaces. This is only one of the reasons why Dawn Powerwash is so excellent and easy to use!
Can I make my own Dawn Powerwash?
Yes, you can! This easy trick will help you save a lot of money! You will have all the information on how to make your own Dawn Powerwash right here.
What is one secret ingredient in DIY Dawn Powerwash?
It is isopropyl alcohol or simply rubbing alcohol! It serves a specific purpose in Dawn’s formulation. Rubbing alcohol helps dissolve and break down grease, oils, and other dirt and grime that can accumulate on surfaces. Even though the percentage of alcohol in Dawn Powerwash is too low to call it a disinfectant, it is effective in killing bacteria and viruses.
What are the DIY Dawn Powerwash ingredients?
You will need only three ingredients to make DIY Dawn Powerwash! One of them is just water! Here is the list:
- 4 tablespoons of Dawn dish soap
- 2 tablespoons of rubbing alcohol (you can use vinegar if you prefer instead)
- 14 oz distilled water (if you have it) otherwise use tap water
What are the ingredients in Dawn Powerwash?
The ingredients in Dawn Powerwash can vary depending on the specific formula. It is important to note that some of the ingredients in Dawn Powerwash can be harmful if ingested or contacted by the eyes. These are the main ingredients in the original version of Dawn Powerwash; Water, Sodium Lauryl Sulfate, Sodium Laureth Sulfate, Dimethyl Amine Oxide, Alcohol 40-B, Sodium Chloride, PPG-26, Phenoxyethanol, Methylisothiazolinone, Fragrance, Colorant.
How to make Homemade Dawn Dish Spray?
This easy recipe will be your new favorite! I will share how to make your own refill step by step.
Step 1
Grab a spray bottle and add approx 14 oz of water to it.
Step 2
Add 4 tablespoons of Dawn dish soap to the bottle.
Step 3
Add 2 tablespoons of rubbing alcohol (or vinegar) to the bottle.
Step 4
Shake the bottle well to mix the ingredients.
Step 5
Your DIY Dawn Powerwash spray is ready to use! You can spray the solution on the surfaces you want to clean and wipe it clean with a cloth.
You Might Also Like: How To Clean White Vans (Ultimate Whitening Vans Guide!)
How to use Diy Dawn Powerwash?
I use my Dawn Powerwash in many different ways. You can spray the mixture directly on your dishes and let it sit as long as possible. The longer you let it sit, the easier it will be to remove grease and grime.
You then use a sponge or a scrub brush to work in circular motions to remove any tough stains. Once you have scrubbed the surface, you can rinse it with clean water to remove any remaining residue.
Lastly, I dry everything with a clean cloth.
FAQs
How is Dawn powerwash different from regular Dawn?
The main difference between Dawn Powerwash and regular Dawn dish soap is how they are used.
Dawn Powerwash is a dishwashing liquid that is formulated to remove tough grease and baked food stains from dishes. It comes in a spray bottle so that you can apply the dish soap directly on dishes without the need for water. Letting it sit for a few seconds to break down the grease and then wiping it away with a sponge will be enough to remove stubborn stains.
On the other hand, regular Dawn dish soap needs to be used with water. You use a small amount of dish soap and wash dishes by hand. Regular Dawn is effective at cleaning the grease, but it may not be as effective on tough stains as Dawn Powerwash.
You might also like this: REMARKABLE PLASTIC WRAP IN MICROWAVE HACK FOR YOU!
Does the percentage of rubbing alcohol I use matter?
Yes, It does! The percentage of rubbing alcohol you use can affect the effectiveness and safety of your Dawn Powerwash. Using a higher percentage of rubbing alcohol can make your solution more effective at removing grease and grime but also make it more flammable. Rubbing alcohol typically comes in 70% to 99% range, but it is easier to find 70% in stores.
Does Dawn Power wash really work?
Yes, it really works! I have saved so much money and reduced waste thanks to this recipe. You can not only use it for cleaning dishes but also for stains on your clothes! DIY Dawn Powerwash is definitely worth trying.
Can you refill Dawn Powerwash with regular Dawn?
Yes, you can refill Dawn Powerwash with regular Dawn dish soap. But you will need to dilute it with water to get the same concentration as the Dawn Powerwash formula.
Do you have to rinse Dawn Powerwash?
Dawn Powerwash is designed to clean dishes without scrubbing, but it is still a detergent, so it can leave a soapy residue if not rinsed off. You can simply wash away the suds using warm water. Once it is thoroughly rinsed, you can dry it with a towel or let it air dry. Leaving soap residue on dishes can lead to a buildup over time, which can also cause discoloration.
Does Dawn powerwash kill germs?
Dawn Powerwash is effective at removing dirt and grime, but it is not a disinfectant. It is not formulated to kill germs but can help remove germs and bacteria from surfaces. The ingredient that helps break up the dirt is called surfactant. Surfactant lifts away the dirt, grease, and other contaminants from surfaces.
What are the other uses for Dawn powerwash spray?
You can use Dawn Powerwash for a variety of cleaning tasks besides dishes. These surfaces are kitchen appliances, including your stove, oven, microwave, and refrigerator, countertops including granite, marble, and laminate, bathroom surfaces, including your shower, bathtub, sink, and toilet, floors including tile, hardwood, and laminate and outdoor surfaces including outdoor furniture, grill, and even your car.
Always remember to check the manufacturer’s instructions to ensure it is safe to use. I also test a small area to ensure the area is not damaged.
Can I use Dawn powerwash to clean my shower?
Yes, you can use it! Dawn Powerwash has a strong formula to remove soap scum, mildew, and other stains that can build up in your shower over time.
Wet the surface of your shower with water, then spray Dawn Powerwash onto the walls, floor, and any other surfaces you want to clean. Let it sit for a few minutes to break down the dirt. You can use a scrub brush to scrub the surface in circular motions. Lastly, rinse the surface with warm water to remove any remaining soap.
Can you mix hydrogen peroxide and Dawn powerwash?
Mixing hydrogen peroxide and Dawn Powerwash is not recommended because it can create a hazardous chemical reaction. They can create oxygen gas which can build up and cause an explosion. So it is best to use them separately and rinse the surface.
Can you use Dawn Powerwash to clean the toilet?
Toilet bowls require a specialized toilet bowl cleaner to dissolve mineral deposits and remove stains. Dawn Powerwash can be used to clean a variety of surfaces, but it is not recommended for cleaning toilets because Dawn Powerwash works better on hard surfaces such as countertops, floors, and walls.
You might also like this: THE BEST GROUT CLEANER FOR KITCHEN AND BATHROOM FLOORS!
Can you use Dawn Powerwash on grout?
Yes, you can use Dawn Powerwash on the grout to remove dirt and stains. Although Dawn Powerwash’s effectiveness changes depending on the severity of the stains, it does clean the surface.
You can wet the grout with water first, then spray Dawn Powerwash directly onto the grout and let it sit for a few minutes. Lastly, scrub the grout using an old toothbrush. Rinse the grout with water and wipe away the remaining residue.
Can you mix Dawn Powerwash and vinegar?
Dawn Powerwash is an alkaline-based cleaner, while vinegar is acidic. Mixing them can create a chemical reaction that produces chlorine gas. So it is not recommended to mix Dawn Powerwash and vinegar. It is best to use them separately. But you can mix regular Dawn dish soap with vinegar to create the BEST shower cleaner!
What happens when you mix Dawn dish soap and baking soda?
When you mix Dawn dish soap and baking soda, the paste forms helping to break down dirt and grime. This paste is often used as a homemade cleaner. It can be applied to various surfaces, such as sinks, tubs, and showers, to remove stains.
Baking soda is a mild abrasive that helps to scrub away dirt, while Dawn dish soap is a powerful degreaser that can help remove grease and oils.
The mixture shouldn’t be used on all surfaces. Baking soda may scratch delicate surfaces such as plastic or glass. It is important to rinse the surface thoroughly to avoid leaving any residue. But overall, this combination is an inexpensive way to clean various surfaces around your house.
Why should you put Dawn in your toilet at night?
Combination of hot water and Dawn dish soap help to dissolve and break up dirt in your toilet. If you are looking for ways to keep your toilet clean and fresh, you can try this mixture quickly!
Can you use Dawn Powerwash on the glass stove top?
Stovetops are one of the areas that get greasy so easily from bacon grease to sauces boil over. You can imagine how messy it gets when my four kids decide to help with the cooking!
Depending on the type of stove you have, Dawn does a great job with those greases and grime.
If you want to clean a glass stove top, I recommend using a cleaner specifically for that purpose. Glass stove top cleaners are formulated to be safe and effective on this type of surface. You can also try it on a small area first to ensure no damage. If you want a more natural option for cleaning your glass stove top, you can also use a mixture of vinegar and water to clean it.
You might also like this: MIND-BLOWING KITCHEN WRAP HACK THAT IS SO EASY!
How do I clean my oven with Dawn Powerwash?
You can use Dawn Powerwash to remove any grease and grime from your oven easily! Its effective formula will surprise you! Here is step-by-step how to clean your oven with Dawn Powerwash.
Step 1 is removing any loose debris. Begin with removing large pieces of debris from the oven, such as chunks of burnt food. You can use a damp cloth or scraper.
Step 2 is preheating the oven. Turn on your oven and set the temperature to 200°F (93°C). Once it has preheated, turn it off.
Step 3 is applying Dawn Powerwash. Spray the solution directly onto the inside of the oven, specifically on areas with built-up grime. Don’t spray on the heating elements and electrical components.
Step 4 is letting it sit. Let Dawn Powerwash sit for 15-20 minutes to loosen any stubborn grease.
Step 5 is scrubbing. Remove the loosened grease using a damp cloth and wipe away any remaining Dawn Powerwash residue.
Step 6 is rinsing. Rinse it with a sponge and wipe down the inside of the oven.
Step 7 is drying. Allow the oven to air dry, or use a clean cloth to dry the inside thoroughly.
What should you not mix with Dawn?
Dawn is effective dishwashing liquid that should not be mixed with other cleaning products. It can result in dangerous or harmful reactions from certain chemicals.
These products are bleach, ammonia, and hydrogen peroxide. Bleach can create chlorine gas, which can be highly toxic and dangerous. Ammonia can produce harmful fumes and can cause respiratory problems. Hydrogen peroxide can create a dangerous combination that can irritate the skin, eyes, and respiratory system.
P.S: Directly mixing vinegar and Dawn dish soap creates a soapy, sticky residue that can be difficult to remove. So diluting like in the recipe I gave solves the problem.
Is it OK to use Dawn as a laundry detergent?
Dawn is a very effective dish soap, but it is not recommended as a laundry detergent because Dawn has a highly concentrated formula that is intended to be used for cleaning the dishes.
Using Dawn as a laundry detergent may damage your clothes or the washing machine. It might leave a soapy residue that can be difficult to remove.
You can use baking soda, vinegar, or castile soap as a natural alternative to laundry detergent.
What happens if you boil Dawn and water?
Get ready to have some mess! Boiling Dawn and water can create lots of foam as the heat can cause the dish soap formula to expand rapidly. This will make it overflow and create a big mess in your pot or stove. Boiling them might also reduce their effectiveness as a dishwashing solution.
Can you mix Pine-Sol and Dawn?
Pine-Sol is a cleaner that contains pine oil as its active ingredient and is very effective at disinfecting surfaces. On the other hand, Dawn is a dishwashing soap designed to remove grease from dishes.
When they mix, it can create a soapy and sticky residue that can be difficult to remove. They can create a chemical reaction that produces harmful fumes and irritate the skin, eyes, and respiratory system.
You might also like this: HOW TO USE FROZEN PINE SOL IN YOUR KITCHEN HACK!
PUT $1 PINE SOL ON YOUR PANTY LINER!
Can you use Dawn powerwash on quartz countertops?
Yes, you can use Dawn Powerwash on quartz countertops! Quartz is highly durable and resistant to scratches and stains but can be sensitive to acidic or abrasive cleaning products. Dawn Powerwash is a very effective, gentle, and non-abrasive cleaning product. So it allows you to use it on these countertops.
Final Thoughts!
DIY Dawn Powerwash is an affordable and eco-friendly alternative to other cleaning products. It is super easy to make! I recommend you give it a try and see how much it can help you in your home!
